Wood Preservation Methods
The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. Wood is treated as a material in direct comparison with other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The utilization of technology gives wood an upper hand in most of this comparison. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. The biggest threat to wood being moisture and insects has to be kept away from the wood. The water particles in the timber increase the rotting and the insects bore through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. As the name implies the preservative is made of copper products. There are a few disadvantages of this method as a mode of wood preservation. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.
Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.
Resource: click for more info